Hi! In this guide, we will show you how to set up your X32 digital mixer. Today, I wanted to dive into this and really help give a clear picture of how we can use this to our advantage. Depending on its speed and memory configuration, some optimization for audio recording might be required. All 32 tracks would be fed from your DAW into the console where all the magic happens. When the console channel inputs are set to Card, the channel Gain control will be a +/- 12 dB digital trim for the interface card signal, without direct access to any head amp - which is great for mixdown but would be an issue for recording. The x32 should detect that the s16 is disconnected and mute all inputs. X32 Rack: Configuring the X-USB card for use in the console,, 5.1 Starting up, shutting down, and firmware updates, 5.2 Default setup for connecting to monitoring and P.A. The console will automatically detect the X-USB card during the regular boot cycle, and it will display the card’s presence in several instances. 5.13 What kinds of Utilities are available? 5.8 How do I share signals over AES50 Supermac network? Detailed Routing Example. This can either be used for the P16-M monitoring system, the Ultranet speaker distribution from Turbo Sound or a combination of the two.
